Product Gallery
Product Information
The Berridge HR-4 Accent Wall Panel is a metal wall panel designed to integrate seamlessly with many other Berridge wall panels. This bold concealed fastener panel, available in 24 and 22 gauge steel and 0.032 aluminum, interlocks with the Berridge HR-16, HS-8, HS-12, HC-16, and BR-12 wall panels to provide endless design possibilities.
Materials
- 24 and 22 Gauge Steel
- 0.032 Aluminum
Specifications
- Uses: Wall, Fascia, Screen Wall
- Coverage: 4"
- Finishes: Smooth
- Fasteners: Concealed
- Applications: horizontal or vertical over open framing or solid sheathing
- Pattern: 7/8" height and 4" rib with 2" reveal
Installation
- Panel is available from the factory in continuous lengths to a maximum of 40’
- Interlocks with HR-16, HC-16, BR-12, HS-8, and HS-12 Panels
- Use siding starter strip to start panel at bottom of soffit or sill
- Use channel closure at inside and outside corners with or without rubber closures
- Use standard channel at jambs without rubber closures
- Use special channel at jambs without rubber closures
- Use HR rubber closures against air infiltration
See HR-16 Panel for test results on ASTM E-331 and ASTM E-283 with similar panel seams.
Technical
ASTM Tests
-
ASTM E-1592 Wind Resistance Tested
-
ASTM E-283 wind and water resistance tested
Add this item to the download cart, so you can retrieve it as part of a ZIP file.
Download this item directly to your computer.
Downloads
Add this item to the download cart, so you can retrieve it as part of a ZIP file.
Download this item directly to your computer.
General Info
Colors
Miscellaneous
Add this item to the download cart, so you can retrieve it as part of a ZIP file.
Download this item directly to your computer.
Roll Formers
Accessories
Use a starter strip to interlock the first row of panels.
HR-16 rubber closures to prevent air infiltration. One closure spans one panel width.