BERRIDGE BATTEN SEAM PANEL

 

PRODUCT INFORMATION

The Berridge Batten Seam Roof System assembly is a two-part system that utilizes the Berridge Deep Vee structural panel and square snap-on battens for more visible seams. The Deep Vee Panel for Batten Seam may be site-formed with the Berridge Model BP-21 Portable Roll Former. Panel width is 16″ with a batten height of 1-3/4″ and may be installed over open framing or solid sheathing.

  • Available in 24 gauge steel
  • Concealed fasteners
  • Spans over open purlins
  • Bold, batten appearance
  • Florida Product Approval
  • UL90 & UL Fire Resistance listed
  • May be site-formed in continuous lengths with Berridge BP-21 portable roll-former

MATERIALS

  • Standard material is 24-Gauge, Galvalume®
  • Unfinished material is Acrylic Coated Galvalume®

PROFILES

ACCESSORIES

Fasten through Batten Clips along panel ribs. Square Battens snap over clips.
Snap-On Square Battens provide large, visible seams and hide fasteners.
Use as mechanical closure at bottom end of panel runs.
Expansion Clip allows for thermal movement of panels over 30′. Use with Inner Rib.
Use Inner Rib with Expansion Clip to allow thermal movement of panels over 30′ long.