Berridge Classic ShingleBerridge Classic Shingle
Berridge Victorian
Shingle
Both shingles are available prefinished with Berridge color finishes or Satin Finish Galvalume or galvanized. Suitable for either residential, commercial, new or renovation/restoration. Classic and Victorian Shingles have a 9"x12" exposure to the weather and have a stamped scalloped design.
Classic & Victorian Specifications
To use these specs in your project document, just use your mouse to drag and select all specification copy, then copy to the clipboard (CTRL - C), then paste into an open document (CTRL -V).
MANUFACTURER
Berridge Manufacturing Company
1720 Maury Street
Houston, Texas 77026
Phone: (800) 231-8127 Outside TX
(713) 223-4971 In TX
Fax: (713) 236-9422
PDF
DATA SHEET (4 MB FILE)
PDF
File of Installation Details
VICTORIAN & CLASSIC SHINGLE
Berridge Victorian and Classic Shingles were developed for restoration applications to match the authentic appearance of nineteenth century metal roofing shingles, and are available in both unfinished and prefinished metals.
- Traditional appearance
- Hidden Fasteners
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Preformed, prefinished metal roofing and flashings.
B. Miscellaneous trim, flashing, closures, drip flashing,
and accessories.
C. Fastening devices.
1.02 RELATED SECTIONS
A. Section 05120: Structural Steel Framing.
B. Section 05500: Miscellaneous metal fabrication.
C. Section 06100: Rough Carpentry.
D. Section 07631: Flashing and Sheet Metal Gutters.
1.03 REFERENCES
A. American Iron & Steel Institute (AISI) Specification for the Design of Coldformed Steel Structural Members.
B. ASTM A-653 & ASTM A924 Steel Sheet, Zinc-Coated (Galvanized)
C. Spec Data Sheet - Galvalume Sheet Metal by Bethlehem Corp.
D. SMACNA - Architectural Sheet Metal Manual.
1.04 ASSEMBLY DESCRIPTION
A. The roofing assembly includes preformed sheet metal shingles, related accessories, valleys, hips, ridges, eaves, corners, rakes, miscellaneous flashing and attaching devices.
1.05 SUBMITTALS
A. Submit detailed drawings showing layout of shingles, anchoring details, joint details, trim, flashing, and accessories. Show details of weatherproofing, terminations, and penetrations of metal work.
B. Submit a sample of each type of roof shingle, complete with factory finish.
1.06 QUALITY ASSURANCE
A. Manufacturer: Company specializing in ArchitecturalSheet Metal Products with ten (10) years minimum experience.
B. No product substitutions shall be permitted without meeting specifications.
C. Substitutions shall be submitted 10 Days prior to Bid Date and acceptance put forth in an addendum.
D. No substitutions shall be made after the Bid Date.
1.07 DELIVERY, STORAGE AND HANDLING
A. Upon receipt of shingles and other materials, installershall examine the shipment for damage and completeness.
B. Shingles should be stored in a clean, dry place. One end should be elevated to allow moisture to run off.
C. Shingles with strippable film must not be stored in the open, exposed to the sun.
D. Stack all materials to prevent damage and to allow for adequate ventilation.
1.08 WARRANTY
A. Paint finish shall have a twenty year guarantee against cracking, peeling and fade (not to exceed 5 N.B.S. units).
B. Galvalume material shall have a twenty year guarantee against failure due to corrosion, rupture or perforation.
PART 2 PRODUCT
2.01 ACCEPTABLE MANUFACTURERS
A. Berridge Manufacturing Company, Houston, Texas.
B. Substitutions shall fully comply with specified require-ments.
2.02 SHEET MATERIALS
A. Prefinished Metal shall be Hot-Dipped Galvanized - ASTM A446-85 Grade C G90 Coating A525-86 24 Gauge core steel or prefinished Galvalume - ASTM 792-86 AZ-55.
B. Unfinished Metal shall be Grade C Galvalume ASTM 792-86, AZ 55, "Satin Finish".
C. Finish shall be [full strength Kynar 500 Fluoropolymer coating] [Copper-Cote][Lead-Cote] [Champagne] coating, applied by the manufacturer on a continuous coil coating line, with a top side dry film thickness of 0.70 to 0.90 mil over 0.25 to 0.35 mil prime coat, to provide a total dry film thickness of 0.95 to 1.25 mil. Bottom side shall be coated with primer with a dry film thickness of 0.25 mil. Finish shall conform to all tests for adhesion, flexibility, and longevity as specified by the Kynar 500 finish supplier.
D. Strippable film shall be applied to the top side of the painted coil to protect the finish during fabrication, shipping and field handling. This strippable film must be removed before installation.
2.03 ACCESSORY MATERIALS
A. Fasteners: [Galvanized Steel] [Stainless Steel] [Cadmium Plated Steel] with washers where required.
2.04 FABRICATION
A. All exposed adjacent flashing shall be of the same material and finish as the roof shingles.
B. Hem all exposed edges of flashing on underside, 1/2 inch.
2.05
BERRIDGE VICTORIAN SHINGLES:
1. Victorian Shingles shall have a stamped scalloped design. Each Shingle shall have 9" by 12" exposure to the weather.
2. Shingles to be of overlapping, Interlocking Design, fastened to solid substrate with concealed fasteners.
3. Shingles to be of non-combustible 24-Gauge Steel with Class A Fire Rating.
BERRIDGE CLASSIC SHINGLES:
1. Classic Shingles shall have a stamped sculptured design. Each Shingle shall have 9" by 12" exposure to the weather.
2. Shingles to be of overlapping, Interlocking Design, fastened to solid substrate with hidden roofing nails.
3. Shingles to be of non-combustible 24-Gauge Steel with Class A Fire Rating.
PART 3 EXECUTION
3.01 INSPECTION
A. Substrate:
1. Examine plywood or metal deck to ensure proper attachment to framing.
2. Inspect roof deck to verify deck is clean and smooth,free of depressions, waves or projections, level to +/- 1/4" in 20', and properly sloped to [valleys] (or) [eaves].
3. Verify roof openings, curbs, pipes, sleeves, ducts or vents through roof are solidly set, cant strips and reglets in place, and nailing strips located.
4. Verify deck is dry and free of snow or ice. [Flutes in steel deck to be clean and dry] or [joints in wood deck to be solidly supported and nailed].
B. Underlayment:
1. Verify #30 unperforated asphalt saturated roofing felt underlayment has been installed over solid sheathing and fastened in place.
2. One (1) layer of #30 asphalt roofing felt paper for roof slopes of 3:12 and up, two (2) layers where dictated by roof design and climatic conditions (check with Berridge).
3. Ensure felt installed horizontally, starting at eave to ridge with a 6" minimum overlap and 18" endlaps.
4. Ensure that all nail heads are totally flush with the substrate. Nails shall be galvanized roofing nails with Berridge Coated Felt Caps.
3.02 INSTALLATION
A. Comply with manufacturers standard instructions and conform to standards set forth in the Architectural Sheet Metal Manual published by SMACNA, in order to achieve a watertight installation.
B. Install shingles in such a manner that horizontal lines are true and level and vertical lines are plumb.
C. Install starter and edge trim before installing shingles.
D. Remove protective strippable film prior to installation of roof shingles.
E. Attach shingles using manufacturer's standard clips and fasteners, spaced in accordance with approved shop drawings.
F. Do not allow shingles or trim to come into contact with dissimilar materials.
G. Do not allow traffic on completed roof. If required, provide cushioned walk boards.
H. Protect installed shingles and trim from damage caused by adjacent construction until completion of installation.
J. Remove and replace any shingles or components which are damaged beyond successful repair.
3.03 CLEANING
A. Clean any grease, finger marks or stains from the shingles per manufacturer's recommendations.
B. Remove all scrap and construction debris from the site.
3.04 FINAL INSPECTION
A. Final inspection will be performed by a firm appointed and paid for by the owner in accordance with section 01410.
END OF SECTION
NOTE: Please reference Berridge Manufacturing Company's current Sweet's Catalog 07610/BER , Sweet's BuyLine 49510 and 07410/BER for standard product offering with regard to materials, gauges, finishes and colors available.
Return to Factory Products page
Back to Home Page